How to Connect for Audio and Data Control
How to Connect for Audio and Data Control
1.Connect Audio Cables from the McIntosh C2200 MAIN Balanced OUTPUTS to the McIntosh Power
Amplifier Balanced INPUTS.
Note: The unbalanced MAIN Audio Outputs and unbalanced Power Amplifier Inputs may be used instead of the Balanced Connections.
2.Connect Audio Cables from the McIntosh CD Player Balanced Audio Outputs to the C2200 CD Balanced
INPUTS.
Note: The unbalanced Audio Outputs and Inputs may be used instead of the Balanced Connections.
3.Connect an Audio Cable from a McIntosh Tuner 1 Out- puts to the C2200 TUNER INPUTS.
4.Connect an Audio Cable from a Turntable to the PH/ AUX INPUTS and the Turntable Ground Connection to the GND grounding post.
McIntosh CD Player
5.Connect an Audio Cable from the C2200 TAPE/REC OUTPUTS to the Record Inputs of a Tape Recorder and from the C2200 TAPE INPUTS to a Tape Recorder Outputs.
6.Connect a Control Cable from the C2200 CD DATA PORT Jack to the DATA IN Jack on the McIntosh CD Player.
7.Connect a Control Cable from the C2200 TUNER DATA PORT Jack to the DATA IN Jack on the McIn- tosh Tuner.
Note: By adding a McIntosh Remote Control Translator to the C2200, non McIntosh Source Devices such as a Satellite Receiver can be remotely controlled using a McIntosh Remote Control and Keypad/Sensor.
8.Connect the C2200 Power Cord to a live AC outlet.
McIntosh AM/FM Tuner
To AC Outlet
McIntosh PowerAmplifier
in | Tape Deck | out |
Turntable |
10
