Setup
4.Press the SETUP
5.Rotate the Front Panel METER LIGHTS (Menu) to switch Off the Meter Illumination.
6.Press the SETUP
7.Rotate the Front Panel METER LIGHTS (Menu) Con- trol until the word DISPLAY 5 appears.
8.Rotate the BALANCE (Select) Control until the desired Display Brightness is achieved. This sets the Brightness Level with the Meters Illumination Off.
9.Press the SETUP
Input Trim Level
Various Source Components can have slightly different vol- ume levels. This could result in the constant need to readjust the C2200 Volume Control when switching between differ- ent Input Sources. A Volume Trim Feature on the C2200 allows the adjustment of levels for each of the Source In- puts, so that they have the same relative volume. The Tuner and CD Inputs are used in the following example.
Notes: The possible range of adjustment in volume level is
±6dB. The Tape/Record Output Levels are uneffected by any changes in the Trim Settings. Any TRIM adjustments made are retained in permanent memory and can be changed only by performing a new TRIM procedure. The Tuner Input Volume Level can serve as a reference or choose another Input Source that is frequently listened to as the reference. The reference Input Source should be set to a Trim Level of 00.
1.Rotate the INPUT Control to select the Tuner Input and adjust the VOLUME Control to the desired listening level.
2.Press the SETUP
3.The Front Panel Alphanumeric Display will change and the Red LED above the SETUP
4.Rotate the METER LIGHTS (Menu) Control until the words TRIM 00 TUN appears. Refer to figure 5.
Figure 5
5.Rotate the INPUT Control until the words TRIM 00 CD appears. Refer to figure 6.
Figure 6
6.Rotate the VOLUME Control until the Volume Level of the CD Input is the same as the Tuner Volume Level. Refer to figure 7. Figure 7 indicates a 2.5dB decrease in the CD Level.
Figure 7
7.Rotate the INPUT Control until the next desired Input Source Name is displayed.
8.Repeat steps 5, 6 and 7 until all the Inputs with sources connected to the C2200 have the same relative volume levels when switching between them.
9.Press the SETUP
Note: The Trim Level can also be set via the Remote Control. A table has been provided on page 17 to record the changes to the various inputs from the default settings.
Re-Title Inputs
The C2200 has eight Audio Inputs. These inputs already have assigned titles that will allow for immediate hookup, operation and enjoyment.
If these starting assignments do not match up with com- ponents in your system, they may be reassigned from the default settings. The following example will illustrate how to rename the AUX Input to PHONO. When the Input Se- lector is rotated to select what was originally the AUX In- put, PHONO will now appear on the Front Panel Alphanu- meric Display and Power is now supplied to the Vacuum Tubes in Phono Circuitry.
Notes: 1. Unused Inputs may be switched Off so they will not appear when rotating through the input source choices using the Input Selector and also will not be available when using the Remote Control or Keypad. Refer to figure 8.
2.The New Input Titles that are available for all the Inputs (except for the AUX Input) includes TAPE 2, LV, TV, and VCR2. The AUX Input Titles include TAPE 2, LV, TV and PHONO.
Figure 8
15