McIntosh C2200 owner manual Rear Panel Connections

		Rear Panel Connections
Unbalanced MAIN OUT-	TAPE/REC OUT-	VCR, SAT, DVD and CD Bal-
PUTS contain the program	PUTS contain	anced INPUTS accept high
signals at all times. The Un-	RECord Out Signals	level program source signals
balanced 1 and 2 OUTPUTS
contain the program signals
and turn On/Off with the
Front Panel OUTPUTS 1 and
2 Push-buttons

Balanced MAIN OUTPUTS contain the program signals at all times. The Balanced 1 and 2 OUTPUTS and can be switched On/Off with the Front Panel OUTPUTS 1 and 2 Push-buttons

TAPE/REC, VCR, SAT, DVD, CD, CD2 and TUNER unbal- anced INPUTS accept high level program source signals

Gound connection for turntables

Connect the power cord to a live AC outlet. Refer to informa- tion on the back panel of the C2200 to deter- mine the correct voltage

Main Fuse holder, refer to information on the back panel of the C2200 to deter- mine the correct fuse size and rating

POWER CONTROL/TRIG- GERS Outputs send Turn-On signals to other components connected to the C2200. The MAIN Jack sends the signal when the C2200 is switched On. The 1 and 2 Jacks send the signal when the OUT- PUTS 1 and 2 Push-buttons are active. The ACCessory Jack is for sending the signal to McIntosh Source Compo- nents. The SETUP Feature in the C2200 allows the ACC, 1 and 2 Power Control Jacks to be re-assigned to Switch On when the desired Input Source is selected.

The EXTernal	PH/AUX accepts high
SENSOR Jack	level program source sig-
permits the con-	nals or signals from a
nection of a	Moving Magnet Phono
McIntosh IR Sen-	Cartridge. The SETUP
sor for remote	feature determines
operation	whether the Input Jacks
	are set for AUX or
	PHONO
PASS THRU Power	DATA PORTS send
Control input receives	control signals to
a Turn-On signal	compatible source
from a McIntosh	components and allow
Home Theater Con-	Remote Control op-
troller	eration

8