How to Connect for Power Control
How to Connect for Power Control
The four Power Control Jacks have default settings as ex- plained on page 8. The hookup example below utilizing the default settings. If you wish to use any one of the three as- signable Power Control Outputs as a dedicated Trigger in- stead, connect that Component Source Unit’s Power Control Input to the desired Trigger Output (A, B, or C). The de- fault setting in the C2200 Setup needs to be changed to match the new Power Control Connection.
1.Connect a Control Cable from the C2200 POWER CONTROL ACCessory Jack to the Power Control In
McIntosh CD Player
on the McIntosh CD Player.
2.Connect a Control Cable from the McIntosh CD Player Power Control Out Jack to the Power Control In Jack on the McIntosh Tuner.
3.Connect a Control Cable from the McIntosh Tuner Power Control Out Jack to the Power Control Jack on the McIntosh Power Control.
4.Connect a Control Cable from the C2200 MAIN POWER CONTROL Jack to the Power Control In Jack on the McIntosh Power Amplifier.
McIntosh AM/FM Tuner
McIntosh Power Amplifier
McIntosh
Power Control
9