How to Connect for Pass Thru Mode
How to Connect for Pass Thru Mode
The PASS THRU Mode on the C2200 allows it to be part of a Multichannel System for the Left and Right Front Channels, when it is connected to a McIntosh Multichannel Processor such as the MX135.
Any of the C2200’s High Level Inputs may be used for the PASS THRU Function. The C2200 default setting for the PASS THRU feature needs to be changed in Setup.
Connect the basic system as outlined in the two previous pages and then add the two following connections. The ex- ample below uses the AUX Input for the PASS THRU Mode.
1.Connect a Power Control Cable from the McIntosh A/V Controller Power Control Zone A to the C2200 PASS THRU Jack.
2.Connect an Audio Cable from the McIntosh A/V Con- troller Zone A Front Left and Right Audio Outputs to the C2200 AUX 1 INPUTS.
McIntosh A/V Control Center
11