Setup, con’t

Pass Thru Mode

The C2200 can be part of a Multichannel Sound System. The Right and Left Front Channels from a McIntosh Pro- cessor or Decoder can “Pass Thru” the C2200 and on to its associated Power Amplifier(s). The Setup Mode allows the Selection of the Input that will be used for the Right and Left Front Channels Pass Thru Mode. In the example be- low, the Right and Left Front Channels from the Multichan- nel Processor/Decoder will be connected to the AUX Input on the C2200.

Note: The C2200 has the ability to switch Off the Meter Illumination when it is in the Pass Thru Mode. This is accomplished by switching Off the Meter Illumination before entering the Setup Mode.

1.Press the SETUP Push-button to access the Setup Mode.

2.Rotate the BALANCE Control Knob until the words PASSTHRU OFF appears. Refer to figure 17.

Figure 17

3.Rotate the INPUT Control until the Front Panel Alpha- numeric Display indicates PASSTHRU AUX. Refer to figure 18.

Figure 18

4. Press the SETUP Push-button to exit the Setup Mode.

Power On Option

The Power On Option Feature permits using the Main POWER Switch instead of the STANDBY/ON Push-button for switching the C2200 Preamplifier On or Off.

Note: If the Power On Option is switched to the AUTO Mode and the Main POWER Switch is in the Off position, the Front Panel STANDBY/ON Push-button and the Remote Control POWER Push-button will be unable to switch Power On to the C2200.

1.Press the SETUP Push-button to access the Setup Mode.

2.The Red LED above the SETUP Push-button will illu- minate.

3.Rotate the Front Panel METER LIGHTS (Menu) Con- trol until the Front Panel Alphanumeric Display indi- cates POWERON STBY. Refer to figure 19.

Figure 19

4.Rotate the BALANCE (Select) Control until the Front Panel Alphanumeric Display indicates POWERON AUTO. Refer to figure 20.

Figure 20

Remote Control Selection

There are two choices for the Remote Control Codes the C2200 will respond to. The Remote Control included with the C2200 utilizes the NORMal McIntosh Control Codes. The Second Set of Control Codes the C2200 will respond to is referred to as the ALTernate Codes. The ALTernate Codes are for when the C2200 is used together with a McIntosh Multichannel Processor/Decoder in the Pass Thru Mode Hookup. This will prevent the Remote Control from affect- ing the operation of both units at the same time.

Note: If the ALT Remote Control Code is selected, the C2200 will not respond using the supplied McIntosh Remote Control.

1.Press the SETUP Push-button to access the Setup Mode.

2.The Front Panel Alphanumeric Display will change and the Red LED above the SETUP Push-button will be il- luminated.

3.Rotate the Front Panel METER LIGHTS (Menu) Con- trol until the words REMOTE NORM appears. Refer to figure 21.

Figure 21

4.Rotate the Front Panel BALANCE (Select) Control un- til the Front Panel Alphanumeric Display indicates RE- MOTE ALT. Refer to figure 22.

Figure 22

5. Press the SETUP Push-button to exit the Setup Mode.

17

Page 17
Image 17
McIntosh C2200 owner manual Setup, con’t Pass Thru Mode, Power On Option, Remote Control Selection

C2200 specifications

The McIntosh C2200 is a high-fidelity vacuum tube preamplifier that exemplifies the brand's commitment to craftsmanship, performance, and timeless design. Known for its lush sound quality, the C2200 is a premier choice for audiophiles seeking to enhance their audio experience with the warmth and richness that only tube technology can provide.

At the heart of the C2200 is a sophisticated vacuum tube circuit design, which significantly contributes to its sonorous and immersive audio output. The preamp employs 12AX7A dual triode tubes in its audio signal path, ensuring that music is delivered with exceptional clarity and detail. The incorporation of these tubes results in a pleasing harmonic distortion that many listeners find desirable, making the C2200 an appealing option for those who prefer the analog sound characteristics.

One of the key features of the McIntosh C2200 is its dual-mono configuration. This design allows the left and right audio channels to operate independently, minimizing crosstalk and ensuring a more accurate soundstage. Incorporating technologies such as the McIntosh Autoformer, the C2200 ensures consistent quality across various load impedances, which is pivotal for optimal audio performance.

This preamplifier is equipped with a variety of inputs, including five line-level inputs, a phono input for both moving coil and moving magnet cartridges, and a home theater bypass for integration into a multi-channel audio system. This versatility ensures that the C2200 can accommodate various sources, from turntables to digital players.

The user-friendly interface of the C2200 features a remote control, allowing effortless adjustments to volume and source selection from the comfort of your listening position. The beautiful glass front panel, illuminated by the iconic McIntosh blue meters, adds a stunning visual component, making the preamp not only an audio device but also an elegant piece of décor.

In terms of build quality, the C2200 is constructed with a robust chassis and high-grade components. The power supply is well-regulated, minimizing noise and ensuring that the audio signal remains uncolored. Additionally, the proprietary McIntosh power guard circuit prevents distortion and damage, promising years of reliable service.

Overall, the McIntosh C2200 stands as a remarkable achievement in audio engineering, offering audiophiles a unique blend of vintage tube warmth, modern technology, and unparalleled build quality. Whether used in a dedicated listening room or as part of a more comprehensive audio system, the C2200 delivers an aural experience that satisfies even the most discerning listeners.