How to Connect for a Second Room
How to Connect for a Second Room
1.Connect Audio Cables from the C2200 Balanced OUT- PUTS 2 to the Second Power Amplifier Balanced In-
puts.
Notes: The unbalanced Audio OUTPUTS 2 and unbalanced Power Amplifier Inputs may be used instead of the Balanced Connections. When a second room is connected, it is sometimes desirable to switch Off the Loudspeakers in the Main Listening Room. This can be accomplished by connecting the Main Power Amplifier to the C2200 OUTPUTS 1 instead of the MAIN OUTPUTS, so that they can be switched Off by the Front Panel OUTPUTS 1
2.Connect a Control Cable from the C2200 POWER CONTROL 2 Jack to the Power Control In of a McIn- tosh Power Amplifier.
3.Connect an RG6 or RG59U coaxial cable from the EXTernal SENSOR Jack to a Keypad.
Note: A Wall Mounted IR Sensor may also be used in place of the Keypad.
Keypad
McIntosh PowerAmplifier
Right Loudspeaker 4 ohms
Left Loudspeaker 4 ohms
12