Scag Power Equipment MAINTENANCE

31
R
Section 7
MAINTENANCE CHART - RECOMMENDED SERvICE INTERvALS7.1
HOURS
PROCEDURE COMMENTS
BREAK-IN
(FIRST 10) 8 40 100 200 500
XCheck all hardware for tightness
XCheck hydraulic oil level See paragraph 7.3
XCheck all belts for proper
alignment See paragraph 7.8
XChange engine oil and filter See paragraph 7.4
XCheck coolant level See paragraph 7.11
XCheck hydraulic hoses for leaks Use extr eme ca ution when checking the hydraulic hoses.
See paragraph 2.6
XCheck engine oil level See paragraph 7.4
X*Clean mower See paragraph 7.12
XCheck condition of blades See paragraph 7.9
XApply grease to fittings See paragraph 7.2
XCheck tire pressure See paragraph 7.10
XInspect seat belt for wear or
damage See paragraph 2.5
XCheck the operator interlock
system See paragraph 4.2
XCheck coolant level See paragraph 7.11
XCheck battery electrolyte level
clean battery posts and cables See paragraph 7.7
XCheck belts for proper alignment See paragraph 7.8
XApply grease to fittings See paragraph 7.2
XChange engine oil See paragraph 7.4
X*Clean air cleaner element See paragraph 7.6
XCheck lubricant in cutter deck
gearbox See paragraph 7.11
* Perform these maintenance procedures more frequently under extreme dusty or dirty conditions
MAINTENANCE