41
R
Section 7

C. CHECKING THE FAN BELT TENSION (LIqUID-

COOLED ENGINES ONLY)

Periodically check the fan belt tension. The belt should
deflect 1/2" with 10 pounds of pressure. See your Scag
dealer if the belt is in need of adjustment or replacement.
BODY, DECK, AND UPHOLSTERY7.13
CAUTION
Do not wash any portion of the equipment while it
is hot. Do not wash the engine; use compressed
air.
After each use, wash the mower and cutter deck.
1. Use cold water and automotive cleaners. Do not use
pressure cleaners.
Do not spray electrical components.
2.
Use a mild soap solution or a vinyl/rubber cleaner to 3. clean the seat.
Repair damaged metal surfaces using Scag touch-4. up paint available from your authorized Scag dealer.
Wax the mower for maximum paint protection.