Panasonic DMC-TS3 owner manual Taking Pictures Using Auto Bracket, D0 EV J1 EV I1 EV, 3rd picture

Recording

[Rec] Mode: ·¿

Taking Pictures Using Auto Bracket

In this mode, 3 pictures are automatically recorded in the selected Exposure Compensation range each time the shutter button is pressed. You can select the picture with the desired exposure from the 3 pictures with different exposures.

With Auto Bracket d1 EV

1st picture 2nd picture 3rd picture

d0 EV j1 EV i1 EV

Press 3 [È] until [Auto Bracket] appears, set the compensation range of the exposure with 2/1.

•When you do not use Auto Bracket, select [OFF] (0).

Press [MENU/SET].

Note

•When setting Auto Bracket, [ ] appears on the screen.

•When taking pictures using Auto Bracket after setting the Exposure Compensation range, the pictures taken are based on the selected Exposure Compensation range.

When the exposure is compensated, the Exposure Compensation value appears on the lower left of the screen.

•The exposure may not be compensated with Auto Bracket depending on the brightness of the subject.

•[Œ] is set for the flash when Auto Bracket is set.

•Setting of the auto bracket cannot be performed in following conditions.

–In [Transform], [Panorama Assist], [Handheld Night Shot], [Hi-Speed Burst], [Flash Burst], [Starry Sky], [Pin Hole], [Film Grain] and [Photo Frame] in Scene Mode

–When recording motion pictures

- 64 -