Panasonic DMC-TS3 owner manual It will rotate and display vertically, Back connected to a TV

Basic

[VIERA Link]

Setup so this unit can be controlled by the remote control of the VIERA by automatically coupling this unit with the VIERA Link compatible equipment using HDMI micro cable (optional).

[ON]: Remote control operation of the VIERA Link compatible equipment is enabled. (Not all operations are possible)

Button operation of the main unit will be limited. [OFF]: Operation is performed with the buttons on this unit.

•This will work when the HDMI micro cable (optional) is connected.

•Refer to P142 for details.

[3D Playback]

Setup the output method for 3D pictures.

[ ]: Set when connecting to a 3D compatible television.

[ ]: Set when connecting to a television not compatible with 3D.

Set this when you would like to view pictures in 2D (conventional image) on a 3D compatible television.

•This will work when the HDMI micro cable (optional) is connected.

•Refer to P144 for the method to playback 3D pictures in 3D.

M[Rotate Disp.]

This mode allows you to display pictures vertically if they were recorded holding the camera vertically. (Playback Mode only)

[	]:	It will rotate and display vertically.
[	]:	It will display vertically only when playing
		back connected to a TV.

[OFF]

•Refer to P34 for information about how to play back pictures.

•When you play back pictures on a PC, they cannot be displayed in the rotated direction unless the OS or software is compatible with Exif. Exif is a file format for still pictures which allows recording information etc. to be added. It was established by “JEITA (Japan Electronics and Information Technology Industries Association)”.

•It may not be possible to rotate pictures that have been recorded with other equipment.

•The display is not rotated during Multi Playback.

[Version Disp.]

It is possible to check which version of firmware is on the camera.

- 52 -