Panasonic DMC-TS3 owner manual 172, Please turn camera off and then on again/System Error

Others

[Memory card error.

This card cannot be used in this camera. Format this card?]

•It is a format that cannot be used with this unit.

>Insert a different card.

>Format the card again with the camera after saving necessary data on a PC etc. (P53) Data will be deleted.

[Please turn camera off and then on again]/[System Error]

•This message will be displayed when the lens did not operate properly.

>Turn the camera off and on. If the message persists, contact the dealer or your nearest Service Center.

[Memory card parameter error]/[This memory card cannot be used]

>Use a card compatible with this unit. (P24)

–SD Memory Card (8 MB to 2 GB)

–SDHC Memory Card (4 GB to 32 GB)

–SDXC Memory Card (48 GB, 64 GB)

[Insert SD card again]/[Try another card]

•An error has occurred accessing the card.

>Insert the card again.

>Insert a different card.

[Read Error/Write Error Please check the card]

•It has failed to read or write data.

>Remove the card after turning the power off. Insert the card again, turn the power on, and try to read or write the data again.

•The card may be broken.

>Insert a different card.

[Motion recording was cancelled due to the limitation of the writing speed of the card]

•Use a card with SD Speed Class with “Class 4” or higher when recording motion pictures in [AVCHD].

Also, use a card with SD Speed Class with “Class 6” or higher when recording motion pictures in [Motion JPEG].

•In the event that it stops even after using a “Class 4” card or higher, the data writing speed has deteriorated so it is recommended to make a backup and then format (P53).

•Depending on the type of the card, Motion Picture Recording may stop in the middle.

- 172 -