Panasonic DMC-TS3 owner manual 173, Folder cannot be created, This battery cannot be used

Others

[Cannot record due to incompatible format(NTSC/PAL) data on this card.]

>If you want to delete some pictures, format the card after saving necessary data on a PC etc. (P53)

>Insert a different card.

[A folder cannot be created]

•A folder cannot be created because there are no remaining folder numbers that can be used.

>Format the card after saving necessary data on a PC etc. (P53) If you execute [No.Reset] in the [Setup] menu after formatting, the folder number is reset to 100. (P50)

[Picture is displayed for 16:9 TV]/[Picture is displayed for 4:3 TV]

•Select [TV Aspect] in the [Setup] menu if you want to change the TV aspect. (P51)

•This message also appears when the USB connection cable is connected to the camera only. In this case, connect the other end of the USB connection cable to a PC or a printer. (P150, 153)

[This battery cannot be used]

•The battery cannot be recognized by the camera.

>Use a genuine Panasonic battery. If this message is displayed even when a genuine Panasonic battery is used, contact the dealer or your nearest Service Center.

•The battery cannot be recognized as its terminal is dirty.

>Remove any dirt etc. from the terminal.

[To prevent water leakage, ensure that the door is locked properly.]

•Refer to P22 for details.

- 173 -