Playback/Editing

[Video Divide]

Recorded motion picture can be divided in two. It is recommended for when you want to divide a part you need with a part you do not need.

It cannot be restored once divided.

Select [Video Divide] on the [Playback] Mode menu. (P44)

Press 2/1 to select the motion picture to divide, and then press [MENU/SET].

Press 3 at the location to divide.

Motion picture is played back from the same location when 3 is pressed again.

Press 4.

Confirmation screen is displayed. It is executed when [Yes] is selected. Exit the menu after it is executed.

Motion picture may be lost if the card or battery is removed while processing the dividing.

Note

[Video Divide] may not be performed on motion pictures recorded with other equipment.

Motion pictures cannot be divided at a location close to the start or end of the motion picture.

With [Motion JPEG] motion pictures, the order of pictures will change if divided.

It is recommended to display these motion pictures by using [Calendar] or [Video Only] in the [Filtering Play].

With [AVCHD] motion pictures, the order of pictures will not change.

Motion pictures with a short recording time cannot be divided.

- 130 -

Page 130
Image 130
Panasonic DMC-TS3 owner manual 130, Video Divide, It cannot be restored once divided