Panasonic DMC-TS3 Taking Pictures Using the Built-in Flash, Set the flash to match the recording

Recording

[Rec] Mode: ñ·¿

Taking Pictures Using the Built-in Flash

APhoto flash

Do not cover the flash with your fingers or other objects.

	Switching to the appropriate flash setting
Set the flash to match the recording.
	Press 1 [‰].
	Press 3/4 to select a mode and then press [MENU/SET].
	Item	Settings
	‡: AUTO	The flash is automatically activated when the recording
		conditions make it necessary.
		The flash is automatically activated when the recording
	ˆ:	conditions make it necessary.
		It is activated once before the actual recording to reduce the
	AUTO/Red-Eye	red-eye phenomenon (eyes of the subject appearing red in the
	Reduction¢	picture) and then activated again for the actual recording.
		• Use this when you take pictures of people in low lighting
		conditions.
	‰: Forced Flash ON	The flash is activated every time regardless of the recording
	Š:	conditions.
	Forced ON/Red-Eye	• Use this when your subject is back-lit or under fluorescent
	Reduction¢	light.
		If you take a picture with a dark background landscape, this
	‹:	feature will slow the shutter speed when the flash is activated so
		that the dark background landscape will become bright.
	Slow Sync./Red-Eye
	Reduction¢	Simultaneously it reduces the red-eye phenomenon.
		• Use this when you take pictures of people in front of a dark
		background.
	Œ: Forced Flash OFF	The flash is not activated in any recording conditions.
		• Use this when you take pictures in places where the use of
		the flash is not permitted.

¢The flash is activated twice. The subject should not move until the second flash is activated. Interval until the second flash depends on the brightness of the subject.

- 58 -