Others

Message Display

Confirmation messages or error messages will be displayed on the screen in some cases. The major messages are described below as examples.

[GPS feature is not available in this region.]

The GPS may not operate in China or close to the Chinese border in neighbouring countries. (As of December 2010)

[This picture is protected]

>Delete the picture after canceling the protect setting. (P136)

[Some pictures cannot be deleted]/[This picture cannot be deleted]

Pictures not based on the DCF standard cannot be deleted.

>If you want to delete some pictures, format the card after saving necessary data on a PC etc. (P53)

[Cannot be set on this picture]

[Title Edit], [Text Stamp] or [Print Set] cannot be set for pictures not based on the DCF standard.

[Not enough space on built-in memory]/[Not enough memory on the card]

There is no space left on the built-in memory or the card.

When you copy pictures from the built-in memory to the card (batch copy), the pictures are copied until the capacity of the card becomes full.

[Some pictures cannot be copied]/[Copy could not be completed]

The following pictures cannot be copied.

When a picture with the same name as the picture to be copied exists in the copy destination. (Only when copying from a card to the built-in memory.)

Files not based on the DCF standard.

Moreover, pictures recorded or edited by other equipment may not be copied.

[Built-In Memory Error Format built-in memory?]

This message will be displayed when you formatted the built-in memory on a PC.

>Format the built-in memory on the camera again. (P53) The data on the built-in memory will be deleted.

- 171 -

Page 171
Image 171
Panasonic DMC-TS3 owner manual Message Display, 171