Xerox 180 IPS 2Expected third-partyinput paper feed path, 3Neutral area, to remain unoccupied

PRINTER SPECIFICATIONS AND REQUIREMENTS

Service access The following figure provides space planning information and service access requirements for the bypass transport from a top view.

Figure 6-8.Bypass transport space planning diagram

1Recommended third-party feeder hardware attaches at rear of 96/4635/180 printer.

2Expected third-party input paper feed path

3Neutral area, to remain unoccupied

4Shaded areas at rear and right side of the bypass transport require third-party input/output devices to be undockable from the feeder/stacker or the bypass transport.

5Register edge of the output sheet

6Third-party hardware must not extend more than 1 inch / 25 mm beyond bypass transport front cover line for correct front door access.

7Bypass transport / input enablement jam clearance space is required.

6-14 XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE