Xerox 180 IPS manual Install

PREPARING FOR INSTALLATION

Table 4-1.96/4635/180 IPS installation planning checklist

(continued)

				Date
Week	Activity	Reference	Responsibility	completed
-2	Inspect and approve site.		Xerox	________
	Order consumable supplies. Minimum supplies	Chapter 4,	Customer and Xerox	________
	needed for installation are:	Appendix A, and
		sales rep.

•Paper (2 cartons)

•	Developer (1 carton) or	5R161
	Developer, MICR (1 carton)	5R573
• Fuser agent (2 boxes).		8R2955
•	Dry ink (1carton). or	6R206
	Dry ink, MICR (1 carton).	6R819

Note: After installation, you will need to establish a procedure for ordering supplies according to your ongoing production requirements.

-1	Schedule operator training.	Systems analyst	Customer and Xerox	________
		(U.S.) or site
		representative
		(non-U.S.)
	Define parameters needed to configure PSF for	Appendix D and E	Customer	________
	connectivity to the IPS printer.
Install	Make sure supplies are available.	Chapter 4 and	Customer	________
		Appendix A
	Make sure system administrators are available		Customer	________
	during software installation.
	Provide host channel address and channel unit		Customer	________
	address (if printing via channel).
	Provide host IP address.	Appendix D and E	Customer	________
	Sysgen your host to print to an AFP Type 1,		Customer and Xerox	________
	Group 3 printer.
	Set up Data Transfer Mode.		Customer and Xerox	________
	Install 96/4635/180 IPS printer hardware and		Xerox	________
	software.
	Have operators available for training.	Appendix B	Customer	________
	Check documentation and software kits for		Customer	________
	completeness.
	Have test jobs ready to run.		Customer	________
	Provide stocks needed for default input		Customer	________
	configuration
	Provide parameters needed to configure PSF	Appendix D or E	Customer	________
	for connectivity to the IPS printer.

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 4-5