Xerox 180 IPS Printer specifications and requirements, 1.Printerelectrical requirements, 96/4635

6. Printer specifications and requirements

This chapter provides power and space requirements for your 96/4635/180 printer. It also provides printer environmental specifications.

For facts about controller power and space requirements, refer to the “Controller specifications and requirements” chapter of this guide.

Power requirements

Your 96/4635/180 printer has important power requirements that must be accommodated. These requirements are summarized in the table below. For further details on power requirements, refer to the voltage charts and wiring diagrams that follow.

For details on controller power requirements, refer to the “Controller specifications and requirements” chapter of this guide.

Table 6-1.Printer electrical requirements

			Amp.
	Printer	Voltage	service	KVA rating	NEMA
Printer — 60 Hz	180	120/240 VAC or 120/208 VAC	50 amp	Operating: 7.3	14-50R
(U. S. and Canada)	(Dual	(Cord 1)	(Cord 1)	+ .75 per middle	(Cord 1)
	cords)	120/240 VAC or 120/208 VAC	30 amp	module stacker	14-30R
		(Cord 2)	(Cord 2)		(Cord 2)
	96/4635	120/240 VAC or 120/208 VAC	50 amp	Operating: 7.3	14-50R
				+ .75 per middle
				module stacker
Printer— 50 Hz	180	220, 230, 240 VAC	30 amp	Consult local
DELTA	4635	(3 phase, 4 wire)		service rep.
	96
WYE	180	380, 400, 415 VAC	20 amp	Consult local
(Star)	4635	(3 phase, 5 wire)		service rep.
	96
		Agency certification: UL 478 and 1950, IEC 950, CE Mark,
		CSA 22.2 #220-1986, FCC (Class A), and VDE 0871 (Class A).

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 6-1