PRODUCT OVERVIEW
System features
The 96/4635/180 IPS provides numerous features that can be enabled or configured using the graphical user interface on the printer controller.
•
•
•
Multiple input trays — Multiple feeder trays can be configured to feed paper for jobs in the most effective manner. For example, the trays can provide nonstop printing of a complex job that requires many paper stocks, or only a few stocks, by using the trays’ continuous loading capability. A different input tray can also be selected for each copy of a specific page in a print job, for example, to provide different paper colors for specific pages.
—96 IPS: Three addressable input trays are standard with the system, and one additional tray is available as an option.
—4635 and 180 IPS: Four addressable input trays are standard with the system, and two additional trays are available as options.
Feeder tray capacities, based on
—Tray 1: 1,100 sheets
—Tray 2: 600 sheets
—Trays 3 and 4: 2,600 sheets
—Optional trays (5 and 6): 2,600 sheets each.
Roll feeder support — The 96, 4635, and 180 IPS can each accommodate a
—The 96 and 4635 IPS have an optional configuration in which the roll feeder interfaces with the last feeder/stacker module. With this configuration, the 4635 IPS may have up to six feeder trays, with the sixth being the roll feeder. The 96 IPS may have up to five input trays, with the roll feeder as the fifth.
Note: To be able to use this roll feeder option on the 96/4635 IPS, you must have the Input Enablement kit installed. (Refer to the “Printer components and options” chapter of this guide.) 
—The roll feeder option for the 180 IPS is installed in the inverter feeder/stacker module, replacing the feeder tray. It does not require the Input Enablement kit or DFA software. The maximum number of feeder/stacker modules supported for this configuration is four, including the inverter module with the roll feeder. With the two processor feeder trays, this makes a total of six input trays possible.
Advanced paper handling — The 96/4635/180 IPS can handle paper stock ranging in size from 8 by 10 inches / 203 by 254 mm to 14 by 17 inches / 356 by 432 mm, including sizes A3 and A4.
XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE |
