Xerox 180 IPS manual 1Vent in front of processor, 2Fan in back of processor

CONTROLLER SPECIFICATIONS AND REQUIREMENTS

The following illustration shows fan and vent locations on the front and back of the controller.

Figure 5-5.Sun Ultra 60 fan and vent locations to keep clear

1Vent in front of processor

2Fan in back of processor

3Vent in back of processor

Do not:

•

•

Do not place the controller monitor on top of the processor.

Do not allow any piece of equipment to blow warm air into the air intake vents of the processor.

•Do not place the processor on its side, or in any other position but the upright, vertical position shown in the previous figure.

•Do not place the processor or monitor on top of the printer.

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 5-7