Xerox 180 IPS manual Bypass transport specifications

PRINTER SPECIFICATIONS AND REQUIREMENTS

Bypass transport specifications

The bypass transport option enables you to add a third-party finishing device to your 96, 4635, or 180 printer. The bypass transport is installed by your service representative and remains permanently in place. You should not attempt to remove or reinstall it. The following is supported by the bypass transport:

•Paper size and weight — You can use all of the paper sizes and weights supported on the 96/4635/180 in the bypass transport.

•

•

Sheet exit orientation — 1 to N (the same order in which sheets are fed from the printer), delivered face down.

Maximum throughput speed — The bypass transport for the 96 and 135 printer supports throughput speeds of up to 139 ppm (pages per minute). The 180 bypass transport supports speeds up to 180 ppm. (These rates are based on stocks up to 9 by 14.33 / 229 by 364 mm in length.)

•Sheet exit height — 34 inches / 86 cm above the floor.

6-12 XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE