Xerox 180 IPS manual VM sample definitions

TABLE OF CONTENTS

VM sample definitions	D-6
VSE sample definitions	D-6

E. Defining the printer to the host: TCP/IP attachment				E-1
	MVS or OS/390 parameters			E-1
		Software prerequisites – MVS		E-1
		Network configurations – MVS		E-2
		Configuration steps – MVS		E-2
1.			Configure the IPS printer for TCP/IP at the GUI	E-2
2.			Configure the MVS CCU for the MVS host to MVS	E-2
3.			Configure the PSF printer in JES2 or JES3	E-2
4.			Configure the printer in PSF/MVS	E-7
5.			Configure TCP/IP for MVS for the printer	E-11
6.			Test the printer to ensure it prints from the MVS host	E-14
		Correcting for printer performance issues – MVS		E-16
		References		E-17
	AS/400 parameters			E-18
		Software prerequisites – AS/400		E-18
		Network configurations – AS/400		E-18
		Configuration steps – AS/400		E-19
1.			Configure the IPS printer for TCP/IP at the GUI	E-19
2.			Create the PSF/400 configuration	E-19
3.			Create the printer device description – AS/400	E-20
4.			Test the printer connection – AS/400	E-22
		Correcting for printer performance issues – AS/400		E-24
		References – AS/400		E-24
	AIX parameters			E-25
		Software prerequisites – AIX		E-25
		Network configurations – AIX		E-26
		Configuration steps—AIX		E-26
		References		E-27
	OS/2 parameters			E-28
		Software prerequisites – OS/2		E-28
		Network configurations – OS/2		E-28
		Configuration steps – OS/2		E-29
1.			Configure the printer for TCP/IP in OS/2	E-29
2.			Provide TCP/IP routing information, if necessary	E-29
3.			Define the printer to PSF/2	E-30
4.			Define a PSF/2 print queue for the printer (optional)	E-31
5.			Test the printer connection in OS/2	E-32
		Correcting for printer performance issues – OS/2		E-34

viii XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE