Xerox 180 IPS manual 7. Turning radius for printer separated, Passage or doorway A width

PRINTER SPECIFICATIONS AND REQUIREMENTS

Turning radius for printer with separated components

The 96, 4635 or 180 is delivered with the printer, inverter feeder/ stacker, and each feeder/stacker as separate modules. If necessary, the printer can be separated into two pieces for ease in moving. The larger of the two parts contains the xerographic system; the smaller of the parts (the paper handling module, or PHM) contains paper trays 1 and 2. Do not confuse these two parts of the printer with the inverter and feeder/stacker modules, which have their own turning requirements.

The following table lists the turning requirements for the printer without the PHM (separated).

Table 6-7.Turning radius for printer (separated)

Passage or doorway A width	Minimum passage B width
29 inches / 73.7 cm	74.5 inches / 189.2 cm
30 inches / 76.2 cm	64.5 inches / 163.8 cm
31 inches / 78.7 cm	62 inches / 157.5 cm
32 inches / 81.3 cm	59.5 inches / 151.1 cm
34 inches / 86.4 cm	56 inches / 142.2 cm
36 inches / 91.4 cm	53 inches / 134.6 cm
38 inches / 96.5 cm	50 inches / 127 cm
40 inches / 101.6 cm	48 inches / 121.9 cm
42 inches / 106.7 cm	45.5 inches / 115.6 cm

The following table lists the turning requirements for the printer if it is upended for easier moving or stair-climbing. This table reflects requirements for the printer separated from the PHM.

Table 6-8.Turning radius for printer (separated and upended on dolly)

Passage or doorway A width	Minimum passage B width
30 inches / 76.2 cm	49 inches / 124.5 cm
31 inches / 78.7 cm	43 inches / 109.2 cm
32 inches / 81.3 cm	41 inches / 104.1 cm
34 inches / 86.4 cm	37.5 inches / 95.3 cm
36 inches / 91.4 cm	35 inches / 88.9 cm
38 inches / 96.5 cm	33.5 inches / 85.1 cm
40 inches / 101.6 cm	32 inches / 81.3 cm
42 inches / 106.7 cm	31 inches / 78.7 cm

6-26 XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE