Xerox 180 IPS Preparing for installation, Responsibilities, Xerox responsibilities, Installation

4. Preparing for installation

This chapter assists you in preparing for the installation of your Xerox DocuPrint 96/4635/180 IPS and 96/4635/180 MICR IPS.

Preparing for installation is a responsibility shared by personnel at your site and Xerox. Your service representatives are available to discuss installation issues and to assist you in completing the site installation tasks.

Prior to installation, you must select and prepare an appropriate location for the printer and order supplies. This chapter helps you accomplish these tasks by providing the following information:

•

•

•

A summary of your responsibilities and those of your Xerox service representative

A checklist of installation planning activities.

Connectivity requirements for setting up the IPS to receive data from the IBM host.

For information on controller power and space requirements, refer to the “Controller specifications and requirements” chapter of this guide. For facts about printer power and space requirements, refer to the “Printer specifications and requirements” chapter of this guide.

Responsibilities

This section describes your site responsibilities and the responsibilities of your service representatives. Included are some joint responsibilities.

Xerox responsibilities

This section lists the responsibilities of the service representatives and system analysts prior to, during, and after installation:

•

•

Site selection

—Assist in site selection

—Inspect and approve the site.

Installation

—Schedule the delivery of the hardware

—Monitor installation activities

—Assist you in ordering any supplies required

—Configure system parameters.

—Assist with the entry of DFA personality profiles for use with third-party feeding or finishing devices.

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 4-1