Xerox 180 IPS manual Space requirements, Printer placement

PRINTER SPECIFICATIONS AND REQUIREMENTS

Space requirements

You should consider the following factors when deciding where to place the printing system hardware components:

•

•

•

Adequate work space and service clearance around the equipment

Proximity to electrical and network connectors

Security of the work area. You may need to place the system in an area where you can restrict access to it. This may be important if your personnel need to print confidential documents or if you are concerned with unauthorized usage.

Dimensions and weights of the printer components are listed in this section, along with diagrams, to help you visualize the sizes and total space requirements.

Note: There must be a 78-inch / 198-cm vertical clearance throughout the entire area. Your printer must be installed in a fixed location with a minimum clearance space of 36 inches / 91.4 cm around all sides of each piece of equipment for access by service personnel. In addition, there must be 50 inches / 126.9 cm clearance space in front of the printer.

For information on clearance space and other space planning considerations, refer to the “Space planning guidelines” section of this chapter. Contact your service representative if you have questions not specifically addressed in this guide.

Printer placement

The following configurations are available for the Xerox 96/4635/180 printers:

•

•

•

•

Printer + inverter feeder/stacker (96 only)

Printer + inverter feeder/stacker + feeder/stacker

Printer + inverter feeder/stacker + feeder/stacker + feeder/ stacker (4635 and 180 only)

Printer + inverter feeder/stacker + feeder/stacker + feeder/ stacker + feeder/stacker (4635 and 180 only).

Measurements and a top-view diagram for each of these configurations is provided on the following pages.

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 6-7