Xerox 180 IPS Table E-5.PSF/MVSPRINTDEV statement parameters, Item, Source of, Range of, Default

DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT

Table E-5.PSF/MVS PRINTDEV statement parameters

			(continued)
Item		Source of	Range of
description	Default	value	acceptable values	Comments	Your value
PIMSG	(YES,16)	Installation	(YES,nnn) or	YES: Specifies error
		preferences	(NO,nnn)	messages are always
				printed.
				nnn: Specifies maximum
				number of messages
				groups generated before
				job is purged from spool. A
				value of 0 causes printer to
				print continuously,
				regardless of number of
				errors.
PORTNO	5001	Xerox IPS	Valid TCP/IP port	Applicable only to TCP/IP
		Interface	number between	printers. (Ensure the
		windows	5001 and 32767	chosen port number is not
				in TCP/IP list of reserved
				port numbers.)
PSEGDD	None			Name of Page Segment
				library DD statement. For
				best results, the images in
				page segments in this
				library should match the
				resolution the IPS printer is
				using.
SETUP	No Setup	Installation	SETUP=FORMS if	If specified, causes JES to
	messages	preferences	specified	issue FORMS setup
	issued			message when a job prints
				which has a FORMS
				specification different from
				job previously printed. This
				is recommended where
				there are multiple paper
				stocks for use on the IPS
				printer.
RELINTV				Not applicable to Xerox cut-
				sheet printers.
RELMODE	None		IDLE, TIME, or	Not applicable to Xerox cut-
			NONE	sheet printers.

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE E-9