Xerox 180 IPS Define the printer to PSF/2, Table E-24.Parametersfor PSF/2 device definition, Item

DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT

3. Define the printer to PSF/2

Follow these steps to define the IPS printer to PSF/2.

1.Select the Control Panel icon from the PSF/2 folder (located on the OS/2 Desktop).

2.From the Control Panel Main window, click on the Profile pulldown menu.

3.Select New from the Profile menu. The New device dialog window appears.

4.Enter all your new device parameter values in the fields that appear on this window.

5.Select the Settings button in the “Attachment Type” frame. The TCP/IP Settings window appears.

6.Enter the IP Address, TCP/IP Port Number, Form Definition, and Connect Timeout values on the TCP/IP Settings window.

The table below gives defaults, descriptions, and recommended values for the parameters accessible from the New Device and TCP/IP Settings windows.

Table E-24.Parameters for PSF/2 device definition

Item
description	Default	Source of value	Acceptable range	Comments	Your value
Device Name	None	Your choice	Arbitrary, but special	You will refer to the
			considerations if it	printer by this name in
			matches an OS/2	later PSF/2 activities.
			device name	If you use LPT1, LPT2,
				or LPT3 (and they are
				not already being
				otherwise used) you
				are able to use the OS/
				2 commands PRINT,
				TYPE, and COPY with
				the IPS printer.
Device	None	Your choice		Appears in Control
Description				Panel Main window.
Attachment type		Required		If TCP/IP does not	TCP/IP
				appear an available
				attachment type, either
				TCP/IP for OS/2 or the
				TCP/IP Attachment
				Support in PSF/2 has
				not been installed.
				(Refer to the
				appropriate IBM
				installation guide for
				details.)

E-30 XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE