Xerox 180 IPS printer, 60 Hz, Total space, required + access, Power cord: 50 amp, 96/4635/180

PRINTER SPECIFICATIONS AND REQUIREMENTS

Printer hardware specifications and requirements summary

The following table summarizes the specifications and electrical requirements of your printer hardware components.

For a summary of controller hardware specifications and requirements, refer to the “Controller specifications and requirements” chapter of this guide. Contact your service representative if you have questions not specifically addressed in this guide.

Table 6-12.Printer specifications and power requirements—96/ 4635/180

	Dimensions (depth,		Heat
Device	width, height)	Weight	dissipation	Power requirements
96 printer:	d=38.8 in. / 98.6 cm	1925 lbs. /	Operating:	60 Hz:
Inverter feeder /	w=119 in./ 302.3 cm	874 kg	28,140	120/208 VAC
	h= 59.6 in. / 151.3 cm		BTU per
stacker only				(182 V to 220 V),
	Total space		hour
				KVA 7.3 (operating)
	required (+ access):		Standby:	Power cord: 50 amp,
	191 in. w by		4,454
				NEMA 14-50R
			BTU per
	114 in. d /
			hour	50 Hz: Consult your
	567 cm w by			local service
				representative.
	290.3 cm d
96/4635/180	d=38.8 in. / 98.6 cm	2,588 lbs. /	96/4635:	60 Hz:
printer:	w=151.2 in./ 384 cm	1,174.9 kg	Operating:	96/4635:
	h= 59.6 in. / 151.3 cm
Inverter feeder /			28,140
	Total space			120/240 VAC or
stacker + feeder /			BTU per
				120/208 VAC;
stacker	required (+ access):		hour
				50 amp service;
	223.25 in. w by		Standby:
				NEMA L14-50R;
	114 in. d /		4,454	KVA 7.3 (operating)
	567 cm w by		BTU per	180:
			hour
	290.3 cm d		Energy	120/208 VAC
				(182 V to 220 V),
			Saver: 2,700
			BTU per	KVA 7.3 (operating)
			hour	Cord 1: 50 amp,
			180:	NEMA 14-50R
			Operating:	Cord 2: 30 amp,
				NEMA 14-30R
			32,770
			BTU per	50 Hz: Consult your
			hour	local service
			Standby:	representative.
			4,454
			BTU per
			hour
			Energy
			Saver: 2,700
			BTU per
			hour

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 6-29