Xerox 180 IPS manual MVS parameters, Printer definitions for MVS versions earlier than

D.Defining the channel-attached printer to the host

This appendix contains some explanations and sample printer parameters for defining a channel-attached IPS printer to your host, in each PSF environment.

MVS parameters

This section gives examples of printer device parameters and definitions in the MVS mainframe environment using PSF/MVS.

Printer definitions for MVS versions earlier than 4.1.0

The following shows sample parameters for a channel-attached printer such as the IPS, in an MVS environment using versions earlier than 4.1.0.

•

•

JES2 definitions

—Functional Subsystem (PSF) Definition

FSSDEF(FSS1) PROC=APSWPROC,AUTOSTOP=NO, HASPFSSM=HASPFSSM

—PSF Printer Definition

PRT (6) FSS=FSS1,MODE=FSS,PRMODE=(LINE, PAGE,SOSI1),CLASS=F,UCS=0,SEP=YES,SEPDS, CKPTPAGE=100,START=NO,MARK=YES,UNIT=1E8

—Channel address (2-bytes)

—Channel mode (high-speed data transfer)

—Superuser password

—Printer name and boot name

—Having proper resources (such as 300 dpi fonts). PSF definitions

//PRT6 CNTL

//PRT6 PRINTDEV FONTDD=*.FONT01,

//FDEFDD=*.FDEF,

//PDEFDD=*.PDEF,

//OVLYDD=*.OLAY,

//PSEGDD=*.PSEG,

//JOBHDR=*.JOBHDR,

//JOBTRLR=*.JOBTLR,

//DSHDR=*.DSHDR,

//MESSAGE=*.MSGDS,

//PAGEDEF=

//FORMDEF=

//CHARS=

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE D-1