Xerox 180 IPS manual Table E-15.Create PSF Configuration screen AS/400

DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT

Table E-15.Create PSF Configuration screen – AS/400

Create PSF Configuration (CRTPSFCFG)

Type choices, press Enter.
PSF configuration	> XEROXIPS	*
Library	> QGPL
User resource library list.	*JOBLIBL
Device resource library list....	*DFT
+ for more values
IIPDS pass through	*NO
Activate release time	*NORDYF
Release time	> *SEC15
Restart timer	> *IMMED
SNA retry count	2
Delay time between SNA retries..	0
Text ‘description’	*BLANK
Additional parameters....
Blank page	*YES
Page size control	*NO
Resident font	*NO
Resource retention	*YES
Edge orient	*NO
Remote location:
Name or address	> ‘9.9.999.999’	*
TCP/IP port	> 5001	*
TCP/IP activation timer...	170

3. Create the printer device description – AS/400

Follow these steps to create the device description for the IPS printer.

1.At the AS/400, press <F4> to prompt the CRTDEVPRT command.

2.Key in the parameter values as indicated in the appropriate figure below.

•Table E-16 shows printer description parameters for OS/ 400 with V3R7 installed.

•Table E-17 shows parameters for OS/400 with V3R2 installed.

For parameters with * beside them, refer to the configuration worksheet, earlier in this section.

E-20 XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE