Xerox 180 IPS manual Table E-3.JES3FSS statement parameters, Item, Range of, description, Default

DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT

The following table lists the JES3 FSS statement parameters to be defined.

Table E-3.JES3 FSS statement parameters

Item			Range of
description	Default	Source of value	acceptable values	Comments	Your value
FSSNAME	None	Installation	1 to 8-character	Specifies name of the FSS.
		preferences	alphanumeric string	(Required parameter)
MSGDEST	JES	Installation	JES or a destination	Specifies the console
		preferences	class name	destination class for FSS
				messages.
PNAME	None	Name of the FSS	1 to 8-character	Specifies the procedure for
		procedure	alphanumeric string	starting this FSS. (Different
				FSSDEF statements may
				refer to same procedure.)
SYSTEM	Same as	System ID of system	Valid system ID	Can also be specified as
	specified in	the FSS is to run on.	name	QUEUE=
	JUNIT
	parameter of
	DEVICE
	statement
TERM	NO	Installation	YES or NO	YES specifies FSS
		preferences		terminates if JES3 global
				address space is
				terminated.
TYPE		TYPE=WTR must be	WTR	Specifies FSS is an output
		specified		writer. TYPE=WTR must
				be specified.
BURST	YES	Installation	YES or NO	,M specifies MARKFORM,
		preferences	,M	which causes IPS printer to
				offset-stack or stitch jobs,
				subject to printer’s setting
				and the COPYMARK
				parameter.
COPYMARK	J	Installation	N or J or C	C: IPS will offset-stack or
		preferences		stitch on a dataset copy
				basis.
				J: Printer is to increment
				offset stacking or stitching
				on a job boundary.
				N: Copymarks are
				constant, and no offset
				stacking or stitching is
				done.
DGROUP	None	Installation printer	1 to 8-character	Specifies destination
		destination naming	alphanumeric string	processed by this FSA
		conventions		(applicable only if D is
				specified in the WS
				parameter).
DTYPE	None	PRTAFP1	PRTAFP1	Required parameter

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE E-5