Xerox 180 IPS manual Sun Ultra 60 workstation placement, 1Mouse and mouse pad 2Keyboard 3Monitor

CONTROLLER SPECIFICATIONS AND REQUIREMENTS

Sun Ultra 60 workstation placement

Following are guidelines for placement of the Sun Ultra 60 workstation components of the printer controller.

Figure 5-4.Sun Ultra 60 printer controller hardware

1Mouse and mouse pad

2Keyboard

3Monitor

4Processor

5Table

To ensure consistent performance and avoid any damage to equipment, follow these rules for placing the components of the Sun Ultra 60 controller.

Do:

•Place the monitor and processor on a desk or table top, separate from the printer. The monitor should be placed beside the processor, on the same surface. (The cartridge tape drive may be placed on top of the processor.)

•Keep the processor in an upright, vertical position as illustrated below.

•Allow at least 6 inches / 152 mm of unobstructed space at the front and rear of the processor, so the fan and vents are not blocked.

5-6 XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE