Xerox 180 IPS manual Printer control console, Printer Components And Options

PRINTER COMPONENTS AND OPTIONS

Refer to the System Overview manual for a detailed description of the features and operation of the printer components.

Printer control console

The printer control console is the color monitor located on top of the printer. It contains message areas and graphic displays that alert you to paper jams and other fault and status conditions (such as low dry ink). It also contains buttons which allow you to control certain functions of the printer (for example, continuing an interrupted job) without returning to the workstation controller.

The printer control console has the following features:

•Local controls and displays for jam clearance, paper loading/ unloading, and diagnostics/service (used by the service representative). Two types of messages are displayed on the printer control console: fault messages, which relate to printer malfunctions, and information messages, which relate to printer conditions such as low dry ink.

•

•

Touch-sensitive areas that allow you to select options by touching the printer control console screen. A tone sounds when you touch one of these areas.

Attention alarm tone consisting of three beeps, repeated for ten seconds. The alarm is generated by any event that stops the printer and requires operator attention. The alarm may be disabled by the operator.

The tone stops after three cycles, or when the fault condition is cleared or clearing has started (for example, doors or covers specified in the clearance instructions are opened). You can stop the tone by pressing one of the printer control console buttons or by selecting a function through the touch screen.

3-2 XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE