Xerox 180 IPS manual Table E-3.JES3FSS statement parameters continued, Item, Range of, description

DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT

Table E-3.JES3 FSS statement parameters (continued)

Item			Range of
description	Default	Source of value	acceptable values	Comments	Your value
DYNAMIC	NO	Installation printer	YES or NO	DYNAMIC=NO should be
		name standards		specified so JES3 will keep
				FSA active between
				transmission of datasets.
FSSNAME	None	Name of FSA in	1 to 8-character	Must match value in
		JNAME parameter	alphanumeric string	FSSNAME parameter of
				FSSDEF statement.
JNAME	None	FSSNAME parameter	1 to 8-character	Must match value in
		of FSSDEF statement	alphanumeric string	FSSNAME parameter of
				FSSDEF statement.
JUNIT	ON	See comments.	(Device address,	Device address should not
			Main, dest class,	be specified for TCP/IP
			ON/OFF)	printers.
				Main is name of processor
				the FSS is to run on.
				Dest class is destination
				class for FSA messages.
				ON or OFF specifies
				whether FSA is initially
				online or offline.
MODE	None	Must be FSS.	FSS	MODE=FSS must be
				specified.
WC	Any class	Installation output	List of	If CLASS is specified in the
	selected	class standards	alphanumeric	Work-selection criterion in
			output classes,	the WS parameter, the FSA
			each separated by	selects datasets that match
			a comma	values specified here.
WS		Installation	Work-selection	Consider CL, R, and F.
		preferences (see note)	criterion	See Note below and JES3
				Initialization and Tuning
				Reference manual for more
				information.

Note: The WS parameter CL specifies that datasets with the same class as the WS parameter should be selected. D specifies that only datasets with the same destination as the DGROUP parameter should be selected. F specifies that JES3 is to pass the forms value specified on the DD or OUTPUT JCL statement to the FSA.

Following is an example of the JES3 initialization dataset required commands:

Table E-4.JES3 initialization dataset commands example

FSSDEFTYPE=WTR,FSSNAME=FSSTCP1,PNAME=FSSPROC1,SYSTEM=SYS1,TERM=NO

DEVICEDTYPE=PRTAFT1,JNAME=PRT7,JUNIT=(,SYS1,,OFF),FSSNAME=FSSTCP1, DGROUP=LOCAK, MODE=FSS,PM=(LINE,PAGE,SOSI1),WC=(T),WS=CL,D,F)

E-6 XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE