Xerox 180 IPS manual Timeout, Trace

DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT

Table E-5.PSF/MVS PRINTDEV statement parameters

			(continued)
Item		Source of	Range of
description	Default	value	acceptable values	Comments	Your value
TIMEOUT		Installation	REDRIVE or STOP	REDRIVE: When there is a
		preferences		time-out after period
				specified in DISCINTV
				parameter, REDRIVE
				requests that PSF attempt
				to drive the printer
				according to MGMTMODE
				specification.
				STOP: Forces operator to
				restart FSA.
				Note: REDRIVE is
				recommended for TCP/IP
				printers that may be shared
				with other hosts.
TRACE	NO		YES or NO	Should be used only for
				debugging PSF-related
				problems.

Note: To specify a TCP/IP address space name other than the default (TCP/IP), code the following EXEC statement in the appropriate PSF writer procedure:

STEP01 EXEC PGM=APSPPIEP,

PARM=(,,,,tcpip_name), REGION=4096K

where tcp/ip_name is the name of the TCP/IP address space.

If this parameter is not coded, PSF uses the default name,

TCPIP. (For a full description of the PARM parameter, refer to

Print Services Facility/MVS: Diagnosis Guide and

Reference.)

E-10 XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE