Xerox 180 IPS manual Proc, Autostop, Haspfssm Class, Queue=, Copymark Dataset, Forms, Fss

DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT

SYS1.PROCLIB, although your system may use a different library.)

The JES2 PROC has a DD statement (normally HASPPARM), which points to the initialization dataset. (The location of this statement is ‘SYS1.PARMLIB(JES2PARM);’ however, you should always verify the location on your own system.)

2.Enter the following required commands in the JES2 initialization dataset to define the PSF functional subsystem (FSS):

•

•

One FSS statement for each PSF functional subsystem

One PRTnnnn statement for each functional subsystem application (FSA) under control of the FSS. (This can also be specified as PRINTnn or PRINTERn.)

The following table lists the JES2 FSS statement parameters to be defined.

Table E-1.JES2 FSS statement parameters

Item			Range of
description	Default	Source of value	acceptable values	Comments	Your value
PROC	None	PSF Startup procedure	1 to 8-character	Specifies name of
		name/	alphanumeric string	procedure for starting this
				FSS. Different FSS
				statements can refer to the
				same startup procedure.
AUTOSTOP	NO	Installation	YES or NO	Specifies whether FSS
		preferences		address space is stopped
				automatically if all FSAs
				under control of the FSS
				are stopped.
HASPFSSM	HASPFSSM	JES2 Load module to	HASPFSSM	Either omit parameter or
		be loaded into FSS		specify default value of
		address space		HASPFSSM.
CLASS	None	Installation output	List of	Can also be specified as
		class standards	alphanumeric	QUEUE=
			output classes
COPYMARK	DATASET	Installation	DATASET or JOB	DATASET: IPS printer will
		preferences	or CONSTANT	offset-stack or stitch on a
				dataset boundary.
				JOB: IPS printer will offset-
				stack or stitch on a job
				boundary.
				CONSTANT: Copymarks
				are constant; no offset
				stacking or stitching is
				done.
FORMS	None	Forms that will be	1 to 8 form names	If WS is F, only output with
		printed on this printer	(each 1 to 8	these form names will be
			alphanumeric	selected for printing on this
			characters in	printer.
			length)
FSS	None	Name of FSS	1 to 8-character	Required
			alphanumeric string

XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE E-3