![](/images/new-backgrounds/1206801/20680137x1.webp)
Connect the System
Basic Installation Procedure
1.Connect the LAN: Connect the Wireless Barricade to your PC, or to a hub or switch. Run Ethernet cable from one of the LAN ports on the rear of the Wireless Barricade to your computer’s network adapter or to another network device. You may also connect the Wireless Barricade to your PC (using a wireless client adapter) via radio signals.
2.Connect the WAN: Use an Ethernet cable for connecting the Wireless Barricade to a cable/xDSL modem or Ethernet router.
3.Power on: Connect the power adapter to the Wireless Barricade.
Internet![](/images/new-backgrounds/1206801/20680137xi3.webp)
Internet
Access
Device
Wireless Cable/DSL
Broadband Router
Notebook with
Wireless PC Card
SOHO Office or Residence
Figure 2. Example Network Configuration
7