Configuring the Wireless Barricade g Router
Password Settings
For security you should assign your own password before exposing the Wireless Barricade to the Internet.
(Default: smcadmin)
Passwords can contain from 3 to 12 alphanumeric characters and are case sensitive.
Note: If your password is lost, or you cannot gain access to the user interface, press the Reset button on the rear panel (holding it down for at least five seconds) to restore the factory defaults.
Enter a maximum Idle Time Out (in minutes) to define a maximum period of time for which the login session is maintained during inactivity. If the connection is inactive for longer than the maximum idle time, it will perform system logout, and you have to log into the web management system again.
(Default: 3 minutes)
34
