SMC Networks SMCWBR14-G manual Point-to-Point Tunneling Protocol Pptp

Configuring the Wireless Barricade g Router

•Connect On Demand: When the connection is broken by the idle time, any trigger can make the connection alive.

Note: If you are on a leased line or pay-per min. connection, please set your maximum idle time to 3 minutes. This will cause your Internet connection to drop after

3 minutes of idle time so you won’t be charged for extra online time from your ISP.

Click FINISH to complete the setup.

Point-to-Point Tunneling Protocol (PPTP)

Point-to-Point Tunneling Protocol is a common connection method used for xDSL connections in Europe. It can be used to join different physical networks using the Internet as an intermediary.

If you have been provided with the information as shown on the screen, enter the PPTP Account name and password, Host Name, Service IP Address, the assigned IP Address, and Subnet Mask.

Leave the Maximum Transmission Unit (MTU) at the default value (1460) unless you have a particular reason to change it.

28