Cisco Systems A9014CFD manual Example Displaying Threshold Violations, 40-9

Chapter 40 Digital Optical Monitoring

Examples

Example: Displaying Threshold Violations

This example shows how to display the threshold violations for all transceivers on a Cisco ASR 901 router:

Router# show interfaces transceiver threshold violations

Rx: Receive, Tx: Transmit.

DDDD: days, HH: hours, MM: minutes, SS: seconds

		Time since Last Known
	Time in slot	Threshold Violation	Type(s) of Last Known
Port	(DDDD:HH:MM:SS)	(DDDD:HH:MM:SS)	Threshold Violation(s)
---------	---------------	----------------------	----------------------
Gi0/10	0000:02:50:19	Not applicable	Not applicable
Gi0/11	0000:02:51:15		Rx power low alarm
			-31.0 dBm < -17.1 dBm

Example: Displaying Threshold Violations on a Specific Interface

This example shows how to display violations for the transceiver on a specific interface:

Router# show interfaces GigabitEthernet 0/9 transceiver

ITU Channel not available (Wavelength not available),

Transceiver is externally calibrated.

If device is externally calibrated, only calibrated values are printed. ++ : high alarm, + : high warning, - : low warning, -- : low alarm. NA or N/A: not applicable, Tx: transmit, Rx: receive.

mA: milliamperes, dBm: decibels (milliwatts).

				Optical	Optical
	Temperature	Voltage	Current	Tx Power	Rx Power
Port	(Celsius)	(Volts)	(mA)	(dBm)	(dBm)
---------	-----------	-------	--------	--------	--------
Gi0/9	32.5	3.20	385.1	-5.5	-5.0

Example: When Transceiver Monitoring is Disabled

This example shows how to disable transceiver monitoring for all transceivers:

Router(config-xcvr-type)# no monitoring

This example shows the sample output when transceiver monitoring is disabled:

Router# show interfaces transceiver detail

Transceiver monitoring is disabled for all interfaces.

mA: milliamperes, dBm: decibels (milliwatts), NA or N/A: not applicable.

++ : high alarm, + : high warning, - : low warning, -- : low alarm. A2D readouts (if they differ), are reported in parentheses.

The threshold values are calibrated.

			High Alarm	High Warn	Low Warn	Low Alarm
		Temperature	Threshold	Threshold	Threshold	Threshold
	Port	(Celsius)	(Celsius)	(Celsius)	(Celsius)	(Celsius)
---------		-----------------	----------	---------	---------	---------
	Gi0/10	34.1	85.0	75.0	0.0	-5.0
	Gi0/11	32.8	85.0	75.0	0.0	-5.0
			High Alarm	High Warn	Low Warn	Low Alarm
		Voltage	Threshold	Threshold	Threshold	Threshold
	Port	(Volts)	(Volts)	(Volts)	(Volts)	(Volts)
---------		-----------------	----------	---------	---------	---------
		Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
	OL-23826-09						40-9