Cisco Systems A9014CFD Bits defined by the policy map, Value in the type of service ToS byte

Chapter 24 Configuring QoS

Extending QoS for MLPPP

	Command	Purpose
Step 8
	class class-name	Specifies the name of the class whose policy you want to create.
	Example:
	Router(config-pmap-c)# class
	mplsexpvalues
Step 9
	set mpls experimental topmost	Sets the MPLS EXP field value in the topmost label on an interface.
	mpls-exp-value	• mpls-exp-value—Specifies the value used to set MPLS experimental
	Example:	bits defined by the policy map.
	Router(config-pmap-c)# set mpls
	experimental topmost 4
Step 10
	class class-name	Specifies the name of the class whose policy you want to create.
	Example:
	Router(config-pmap-c)# class
	matchdscpvalues
Step 11
	set dscp dscp-value	Marks a packet by setting the differentiated services code point (DSCP)
		value in the type of service (ToS) byte.
	Example:	• dscp-value—The DSCP value used to identify a DSCP.
	Router(config-pmap-c)# set dscp
	af41
Step 12
	class class-name	Specifies the name of the class whose policy you want to create.
	Example:
	Router(config-pmap-c)# class
	mplsexp_or_dscp
Step 13
	bandwidth percent percentage	Configures the bandwidth allocated for a class belonging to a policy map.
	Example:
	Router(config-pmap-c)# bandwidth
	percent 20
Step 14
	set mpls experimental topmost	Sets the MPLS EXP field value in the topmost label on an interface.
	mpls-exp-value
	Example:
	Router(config-pmap-c)# set mpls
	experimental topmost 1
Step 15
	set dscp dscp-value	Marks a packet by setting the differentiated services code point (DSCP)
		value in the type of service (ToS) byte.
	Example:
	Router(config-pmap-c)# set dscp
	af11

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09		24-69