Cisco Systems A9014CFD manual Configuring Static Remote MEP, Continuity-check static rmep, 10-13

Chapter 10 Configuring Ethernet OAM

Note Use the no form of each command to remove a configuration or to return to the default settings.

Configuring Static Remote MEP

Complete the following steps to configure Ethernet CFM static remote MEP:

	Command			Purpose
Step 1
	configure terminal			Enter global configuration mode.
Step 2
	ethernet cfm domain domain-namelevel level-id			Define a CFM domain, set the domain level, and enter
				ethernet-cfm configuration mode for the domain. The
				maintenance level number range is 0 to 7.
Step 3
	service { short-ma-name number MA-number			Configure the maintenance association and set a
	vlan-idprimary-vlan-id vpn-idvpn-id } {vlan			universally unique ID for a customer service instance (CSI)
	vlan-id port evc evc-name }			or the maintenance association number value, primary
				VLAN ID and VPN ID within a maintenance domain in
				Ethernet connectivity fault management (CFM)
				configuration mode.
Step 4
	continuity-check			Enable sending and receiving of continuity check
				messages.
Step 5
	mep mpid identifier			Define the static remote maintenance end point identifier.
				The range is 1 to 8191
Step 6
	continuity-check static rmep			Enable checking of the incoming continuity check message
				from a remote MEP that is configured in the MEP list.
Step 7
	end			Return to privileged EXEC mode.
Step 8
	show ethernet cfm maintenance-points remote			Verify the configuration.
	static
Step 9
	show ethernet cfm errors [configuration]			Enter this command after you enable CFM crosscheck to
				display the results of the crosscheck operation. Enter the
				configuration keyword to display the configuration error
				list.
Step 10
	copy running-config startup-config			(Optional) Save your entries in the configuration file.
		Note	Use the no form of each command to remove a configuration or to return to the default settings.

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09		10-13