Extreme Networks Summit1 manual RIP Configuration Example

ROUTING PROTOCOLS

Table 10-1:RIP Configuration Commands (continued)

Command	Description
config rip updatetime {<delay>}	Changes the periodic RIP update timer. The
	timer granularity is 10 seconds. The default
	setting is 30 seconds.

RIP CONFIGURATION EXAMPLE

Figure 10-4illustrates a switch that has three VLANs defined as follows:

•Finance

—Protocol-sensitive VLAN using the IP protocol

—Ports 1 and 3 have been assigned

—IP address 192.207.35.1

•Personnel

—Protocol-sensitive VLAN using the IP protocol

—Ports 2 and 4 have been assigned

—IP address 192.207.36.1

•MyCompany

—Port-based VLAN

—All ports have been assigned

10-10 SUMMIT SWITCH INSTALLATION AND USER GUIDE