QUALITY OF SERVICE (QOS)
DISPLAYING QOS INFORMATION
To display QoS information on the switch, use the following command:
show qosprofile {<qosname> all}
Information displayed includes:
•QoS profile name
•Minimum bandwidth
•Maximum bandwidth
•Priority
•A list of all traffic groups assigned to the QoS profile
Additionally, QoS information can be displayed from the traffic group perspective by using one of the following commands:
•show fdb permanent
Shows destination MAC entries and their QoS profiles.
•show switch
Includes PACE enable/disable information.
•show vlan
Shows the QoS profile assignments to the VLAN.
•show ipqos
Displays the IP QoS table.
RESETTING QOS
To delete a QoS profile use the following command:
delete qosprofile <qosname>
This command is available only in egress mode.
SUMMIT SWITCH INSTALLATION AND USER GUIDE |
