Extreme Networks Summit1 manual 5Logging Commands, Command Description

SWITCH LOGGING

Table 12-5:Logging Commands

Command	Description
config log display {<priority>} {<subsystem>}	Configures the real-time log display. Options
	include:
	■ priority — Filters the log to display
	messages with the selected priority or
	higher (more critical). Priorities include
	critical, warning, and informational. If not
	specified, informational priority messages
	and higher are displayed.
	■ subsystem — Filters the log to display
	messages associated with the selected
	switch subsystem. Subsystems include
	Syst, STP Brdg, SNMP, Telnet, VLAN, and
	Port. If not specified, all subsystems are
	displayed.
config syslog <ip_address> <facility>	Configures the syslog host address and filter
{<priority>} {<subsystem>}	messages sent to the syslog host. Options
	include:
	■ ipaddress — The IP address of the
	syslog host.
	■ facility — The syslog facility level for
	local use.
	■ priority — Filters the log to display
	messages with the selected priority or
	higher (more critical). Priorities include
	critical, warning, and informational. If not
	specified, only critical priority messages
	and are sent to the syslog host.
	■ subsystem — Filters the log to display
	messages associated with the selected
	switch subsystem. Subsystems include
	Syst, STP Brdg, SNMP, Telnet, VLAN, and
	Port. If not specified, all subsystems are
	sent to the syslog host.
enable log display	Enables the log display.
enable syslog	Enables logging to a remote syslog host.
disable log display	Disables the log display.
disable syslog	Disables logging to a remote syslog host.

SUMMIT SWITCH INSTALLATION AND USER GUIDE 12-13