Extreme Networks Summit1 manual 5Port Combinations for the Summit4 and Summit4/FX

LOAD SHARING

Table 4-5:Port Combinations for the Summit4 and Summit4/FX

Load-Sharing										1	1	1	1	1	1	1	1	1	1	2	2	2
Group	1	2	3	4	5	6	7	8	9	0	1	2	3	4	5	6	7	8	9	0	1	2
4-port groups	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x			x	x	x	x
2-port groups	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x

Table 4-6:Port Combinations for the Summit48

Load-Sharing	1	2	3	4	5	6	7	8	9	1	1	1	1	1	1	1	1	1	1	2	2	2	2	2
Group										0	1	2	3	4	5	6	7	8	9	0	1	2	3	4
4-port groups	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x
2-port groups	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x
Load-Sharing	2	2	2	2	2	3	3	3	3	3	3	3	3	3	3	4	4	4	4	4	4	4	4	4
Group	5	6	7	8	9	0	1	2	3	4	5	6	7	8	9	0	1	2	3	4	5	6	7	8
4-port groups	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x
2-port groups	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x	x
Load-Sharing	4	5
Group	9	0

4-port groups

2-port groups

x x

To define a load-sharing group, you assign a group of ports to a single, logical port number. To enable or disable a load-sharing group, use the following commands:

enable sharing <master_port> grouping <portlist>

disable sharing <master_port>

The following example defines a load-sharing group that contains ports 9 through 12, and uses the first port in the group as the master logical port 9:

enable sharing 9 grouping 9-12

In this example, logical port 9 represents physical ports 9 through 12.

SUMMIT SWITCH INSTALLATION AND USER GUIDE 4-7