COMMON COMMANDS
Table 3-3: Common Commands (continued)
Command | Description |
config time <date> <time>
config vlan <name> ipaddress <ip_address> {<mask>}
enable bootp vlan [<name> all] enable idletimeout
Configures the system date and time. The format is as follows:
mm/dd/yyyy hh:mm:ss
The time uses a
Configures an IP address and subnet mask for a VLAN.
Enables BOOTP for one or more VLANs.
Enables a fixed value timer that disconnects all sessions (both Telnet and console) after 20 minutes of inactivity. The default setting is disabled.
clear session <number> | Terminates a Telnet session from the |
| switch. |
disable bootp vlan [<name> all] disable idletimeout
Disables BOOTP for one or more VLANs.
Disables the fixed value timer that disconnects all sessions. Once disabled, console sessions remain open until the switch is rebooted. Telnet session remain open until you close the Telnet client.
disable port <portlist> | Disables a port. |
disable telnet | Disables Telnet access to the switch. |
disable web | Disables Web access to the switch. |
delete account <username> | Deletes a user account. |
delete vlan <name> | Deletes a VLAN. |
unconfig switch {all} | Resets all switch parameters (with the |
| exception of defined user accounts) to the |
| factory defaults. If you specify the |
| keyword all, the user account information |
| is reset as well. |
show banner | Displays the |
|
|
SUMMIT SWITCH INSTALLATION AND USER GUIDE |
