Extreme Networks Summit1 manual Summit Rear View, Power Socket, Serial Number, Console Port

SUMMIT REAR VIEW

SUMMIT REAR VIEW

Figure 1-9shows the rear view for the Summit switch.

Power socket and fuse RPS port Console port

!

130001-00 Rev.03

UC U

LL

MODEL/NUMBER MADE IN USA

PART NUMBER

SERIAL NUMBER

MAC ADDRESS

Figure 1-9:Summit rear view

POWER SOCKET

The Summit automatically adjusts to the supply voltage. The power supply operates down to 90 V. The fuse is suitable for both 110 V AC and 220-240 V AC operation.

SERIAL NUMBER

Use this serial number for fault-reporting purposes.

CONSOLE PORT

Use the console port (9-pin, “D” type connector) for connecting a terminal and carrying out local out-of-band management.

REDUNDANT POWER SUPPLY PORT

The redundant power supply (RPS) port is used to connect to a Summit RPS or a Summit Virtual Chassis. Both the Summit RPS and the Summit Virtual Chassis provide a redundant, load-shared power source to the Summit. If the primary power source for the switch fails, the RPS in either the Summit RPS or the Summit Virtual Chassis takes over, ensuring uninterrupted network operation.

SUMMIT SWITCH INSTALLATION AND USER GUIDE 1-17