
RESETTING AND DISABLING RIP
RESETTING AND DISABLING RIP
To return RIP settings to their defaults, or to disable RIP, use the commands listed in Table
Table 10-3: RIP Reset and Disable Commands
Command | Description |
|
|
config rip delete [vlan <name> all] | Disables RIP on an IP interface. When RIP is |
| disabled on the interface, the parameters are not |
| reset to their defaults. |
disable rip | Disables RIP. |
disable rip aggregation | Disables the RIP aggregation of subnet |
| information on a RIP version 2 interface. |
disable rip splithorizon disable rip poisonreverse disable rip triggerupdate disable rip exportstatic unconfig rip {vlan <name> all}
Disables split horizon.
Disables poison reverse.
Disables triggered updates.
Disables the filtering of static routes.
Resets all RIP parameters to the default VLAN. Does not change the enable/disable state of the RIP settings.
SUMMIT SWITCH INSTALLATION AND USER GUIDE |